ZR-40WA CO2 laser power supply

Feature:

1. The blue laser power source has open circuit protection: Under the condition of good protective earth, the  40watt laser power supply can work in open-circuit for a short time, which could avoid the damage to laser power supply

2.Good compatibility: This 40w laser power source can be applicable to most brands of 30Watt, 40Watt, 50Watt CO2 laser tube made by different factories.

3. The green signal terminal laser power source has feedback interface which can be used in closed-loop control and testing the working current of laser.

4.Because of many protect function, this green signal terminal laser power source dramatically lengthen the lifetime of glass type CO2 tube.

5. This ZR-40WA CO2 laser power supply adopts ordinary H/L/P/G/IN/5V as control signal output interface and uses blue aluminum case.

6.Application: Acrylic sculpture, cut; Fabric sculpture, cut; Rubber sheet sculpture, cut, etc.

7.This 40 watt CO2 power supply has an aluminum alloy housing and a dedicated interface for the stamp engraving machine: G/P/L/G/IN/5V. In addition, it also has; DC24V/5V output

8. This blue laser power source has fast response speed and effect.

9.The Co2  laser power source adds a new function, that is timely scene judging which part is damaged on laser tube or laser power supply

10.Easy control of laser power: Both 0-5V analog signal and PWM signal can control the laser power on this 40w laser power source.

11.Easy Control: The start and stop of Co2 laser power can be easily controlled by TTL level on this 40W laser power supply. And it has protection switch to test the external water, ventilation, etc.

Specification：