Hello, welcome to visit the home page of Jinan Ruby Laser Technology Co.,Ltd!

Products

Contact Us

Phone : +86 0531-85908792

Email:Admin:zrsuns@outlook.com          Sales:sales@rlaserpowersupply.com

Skype: ZRsunslaser

Q     Q: 2407603284

Mobile :+86-13295411923

微信

  • ZR-150WD CO2 laser power supply
  • ZR-150WD CO2 laser power supply
  • ZR-150WD CO2 laser power supply
  • ZR-150WD CO2 laser power supply
  • ZR-150WD CO2 laser power supply
  • ZR-150WD CO2 laser power supply
  • ZR-150WD CO2 laser power supply

ZR-150WD CO2 laser power supply

1.The 150w laser psu box adopts one PCS fan for cooling. It use two Taiwans bearing which make the fan runs for very long time.

2.This external potentiometer laser psu box can adopts external LCD digital display module by network cable,which can show constant current laser power driving units working current,working statues and failure code. It is very good function for both machine factory and machine users
3.
This external potentiometer laser psu box selects H/L/P/G/IN/5V green terminal board to accept laser control signal and it has aluminum upper cover and base, galvanized sheet shell..


Order online

ZR-150WD CO2 laser power supply

Feature

1.The analog signals of 0 to 5V or PWM signals can be selected for controlling and regulating this external potentiometer laser psu box's output laser power.

2.The 150w laser psu box has LCD display module: (optional) .Because of it, it do not need to open the outside case. Operator can simply find ordinary code faults and output current at LCD display screen of 150W laser psu box

3.This external potentiometer laser psu box selects H/L/P/G/IN/5V green terminal board to accept laser control signal and it has aluminum upper cover and base, galvanized sheet shell..

4.With open circuit protection, the external potentiometer laser psu box can work in an open-circuit state for a short time, which can avoid the damage of the 150w laser psu box caused by the bursting of the laser tube.

5.This high voltage laser psu box has good grounding protection: It can provide very safe protection for operators

6.This 150w laser psu box has high efficiency and quick response with its zero current half bridge soft switching circuit. Thus it is easy to cooperate with most brand 150W co2 laser tube. 

 and easy remove the trouble. Also the output current can be adjusted by potentiometer on the LCD module

7.This external potentiometer laser psu box can adopts external LCD digital display module by network cable,which can show constant current of 150w laser psu box's working current,working statues and failure code.  It is very good function for both machine factory and machine users

8.The 150w laser psu box adopts two PCS fans for cooling. It use two Taiwans bearing which make the fas run for very long time.

9.This high voltage laser psu box terminal control is simple and adapted to high and low level signals. TTL level can be used to control the start and stop of laser power. At the same time, an abnormal protection switch was added to detect if the external water is ventilated or not.

Specification

Input

Input voltage

AC220V±10% (AC110V specified while order)


AC frequency

47~440HZ


Maximum input power

1000W


Maximum input current

4.5A

Output

Maximum output voltage

40KV


Maximum output current

40mA

(depending on the laser tubes of different manufacturers)

Efficiency

More than 90% (Full load)

Response speed

Not more than 1ms

Control lnterace

TTL multilevel switching control,effective level can be high and low selection (see control wining diagram)

Insulation

lnput-output

AC 1500V 1 minutes not more than 10mA


lnput-shell

AC 1500V 1 minutes not more than10mA


Output-shell

Connection

Open Circuit Protection

Can be short circuit (requires a good grounding shell,while avoiding the positive electrode and the shell between the arc)

Environmental Requested

Working temperature

-10~50


Storage of temperature

-20~75


Relative Humidity

Maximum 85%RH (non-condensing)


Altitude

100,000 feet of work

200,000 feet of storage,dose not work

Cooling methods

Forced air cooling (fan cooling)

Dimensions (LxWxH)

350mmx221mmx105mm


Get the latest price? We'll respond as soon as possible(within 12 hours)
Welcome to Consult
Telephone contact

TELEPHONE

+86-539-8058588

MOBILE PHONE

086-13295411923

WECHAT
CHAT