Hello, welcome to visit the home page of Jinan Ruby Laser Technology Co.,Ltd!

Products

Contact Us

Phone : +86 0531-85908792

Email:Admin:zrsuns@outlook.com          Sales:sales@rlaserpowersupply.com

Skype: ZRsunslaser

Q     Q: 2407603284

Mobile :+86-13295411923

微信

  • BR-60W CO2 Laser power supply
  • BR-60W CO2 Laser power supply
  • BR-60W CO2 Laser power supply
  • BR-60W CO2 Laser power supply
  • BR-60W CO2 Laser power supply

BR-60W CO2 Laser power supply

1.Both analog signals of 0 to 5V and PWM signals are used to control and regulate this AC110V CO2 power supplys output laser power.

2.This LCD screen CO2 power supply has high efficiency and quick response with its zero current half bridge soft switching circuit. Thus it is easy to cooperate with most brand 60W co2 laser tube. 

3.This 60W CO2 laser power supply terminal control is simple and adapted to high and low level signals. TTL level can be used to control the start and stop of laser power. At the same time, an abnormal protection switch was added to detect if the external water is ventilated or not.


Order online

BR-60W CO2 laser power supply

Feature

1.The HV carbon dioxide power supply use one PCS fan for cooling. It use Japans bearing and make the fan works for very long time.

2.This LCD screen CO2 power supply has high efficiency and quick response with its zero current half bridge soft switching circuit. Thus it is easy to cooperate with most brand 60W co2 laser tube. 

3.This AC110V CO2 power supply can adopts ether external LCD digital display module by network cable,which can show HV carbon dioxid power supplys working current,working statues and failure code.  It is very good function for both machine factory and machine users7.This BR-60W CO2 power supply uses ordinary H/L/P/G/IN/5V terminal block to input laser control signal and black steel case.

4.Both analog signals of 0 to 5V and PWM signals are used to control and regulate this AC110V CO2 power supplys output laser power.

5.This 60W CO2 laser power supply terminal control is simple and adapted to high and low level signals. TTL level can be used to control the start and stop of laser power. At the same time, an abnormal protection switch was added to detect if the external water is ventilated or not.

6.This HV carbon dioxide power supply has good grounding protection5.With advanced open circuit protection, the 60W CO2 power supply can work in an open-circuit state for a short time, which can avoid the damage of the LCD screen CO2 power supply caused by the bursting of the laser tube.

Specification

lnput 

Input voltage

AC220V±10% (AC110V specified while order)

AC frequency

47~440HZ

Maximum input power

490W

Maximum input current

2.2A

Output

Maximum output voltage

25KV

Maximum output current

28mA

(depending on the laser tubes of different manufacturers)

Efficiency

More than 90% (Full load)

Response speed

Not more than 1ms

Control lnterace

TTL multilevel switching control,effective level can be high and low selection (see control wining diagram)

Insulation

lnput-output

AC 1500V 1 minutes not more than 10mA

lnput-shell

AC 1500V 1 minutes not more than10mA

Output-shell

Connection

Open Circuit Protection

Can be short circuit (requires a good grounding shell,while avoiding the positive electrode and the shell between the arc)

Environmental Requested

Working temperature

-10~50

Storage of temperature

-20~75

Relative Humidity

Maximum 85%RH (non-condensing)

Altitude

100,000 feet of work

200,000 feet of storage,dose not work

Cooling methods

Forced air cooling (fan cooling)

Dimensions (LxWxH)

210mmx145mmx102mm


Get the latest price? We'll respond as soon as possible(within 12 hours)
Welcome to Consult
Telephone contact

TELEPHONE

+86-539-8058588

MOBILE PHONE

086-13295411923

WECHAT
CHAT